Rejecting A Call; Reserving A Line; Defining The Send Msn For The Next Call - Siemens Gigaset SX303isdn User Manual

Making calls

Rejecting a call

You get an external call or you are making a call and receive an external call. The call is
signalled acoustically and also shown in the display on all telephones or handsets in this
MSN group. You can reject this external call.
Press the display key
Depending on the setting (page 98) the call can be rejected on the base station rejecting
the call only (telephones or handsets with the same receive MSN continue to ring) or it
can be rejected for the entire MSN group (the caller hears the busy tone).

Reserving a line

Your ISDN connection offers you 2 simultaneously usable telephone lines (B channels).
Precondition: You want to make calls externally, but both telephone lines of your
connection are busy (being used by other internal users).
Press the display key
You base station rings as soon as an external line is free.
either ...
c
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
DELETE
i
If the reservation is neither accepted or deleted, it will be deleted
automatically after 30 sec.

Defining the send MSN for the next call

Even if you have defined an individual send MSN for the base station (page 96), you can
select another MSN as the send MSN before each call, e.g. for individual recording of
charges.
Make sure that the send/receive MSN corresponds to the phone number registered at
your SMS centre (page 49).
By factory default, MSN next call is not activated for an MSN.
i
s
Set base
s
Call preparat.
s
MSN next call
s
MSN1:
j
26
.
REJECT
. The next available free line will be reserved for you.
CALLBCK
Use a free line:
Lift the receiver. You can now enter the phone
number as usual.
Delete the reservation:
Press the display key. The reservation is cancelled.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the required MSN and confirm
OK
‰
( = activated).
The next call uses this MSN.
Hold down (back to idle status).