Registering And De-Registering Handsets; Automatic Registration - Siemens Gigaset 4010 Classic Operating Instructions Manual

Gigaset 4010 Classic, GB/IRL, A31008-G4010-B101-1-7619
Press keys:
. . .
1 2
F

Registering and de-registering handsets

Registering and de-registering
handsets
To be able to make calls with your handset, you must
6
"introduce" it to its base station (registering). This is
very simple and occurs automatically.
Handsets of the Gigaset 2000/3000 families and non-
Siemens handsets must be registered manually.

Automatic registration

Gigaset 4000 handsets at the
Gigaset 4010 base station
Automatic registration ("introducing") is only possible
for the supplied handset and any other G4000 hand-
sets bought additionally. Before activating your hand-
set, place it in the base station with the display fac-
ing upward. After approx. 1 minute, the handset's
internal number is displayed (e.g. " 1 ").
¬
Make sure that you do not press the On/Off

key
station. If you have inadvertently activated the
handset, please deactivate it.
The next unassigned internal number (1 – 6) is auto-
matically assigned to the handset. If all numbers are as-
signed, the internal number 6 is re-assigned. The hand-
set which was registered under number 6 is then
deregistered.
It is possible to assign a different internal number (see
page 39) or a different internal name (see page 38) to a
handset later.
mobilt_an.fm
before placing the handset in the base
11.06.01
35