Dialling Emergency Numbers - Siemens Gigaset SX303isdn User Manual

Setting up, editing, reading and deleting personal emergency numbers
i
s
Set base
s
Settings
~
OK
Security
s
Emergency nos.
s
<no entry>
W
either ...
Change number
~
W
Save entry
or ...
s
Display number
or ...
s
Delete number
j
If your phone is connected to a PABX you may have to enter the applicable
i
access code (outside line code, e.g. 0; see page 137) before the
emergency number. This also applies to preset emergency numbers for
which you need to re-enter e.g. "0110" and "0112" as an alternative.

Dialling emergency numbers

Precondition: The base station is blocked for external dialling (page 92).
c
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
EMERG.
... then
~
If the dialled number does not match the emergency number entered, the call is
rejected with the display "Number is not emergency no.".
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
If required, enter the PIN and confirm (page 91).
Confirm.
OK
Select. The emergency numbers list is opened.
Select list entry, e.g. <no entry>.
Press the display key to open the submenu.
Set up or edit emergency number:
Confirm.
OK
Enter new emergency number (up to 32 digits) or
edit existing emergency number. You can transfer
the number from the Phonebook h.
Press the display key to open the submenu.
Confirm.
OK
View emergency number:
Select the menu item and confirm.
OK
Delete emergency number:
Select the menu item and confirm.
OK
Hold down (back to idle status).
Lift the receiver.
Press the display key.
Dial the emergency number:
Enter the emergency number.
Security settings
93