Registering And De-Regestering Handsets; Automatic Registration: Gigaset A 2 Handset; Manual Registration: Gigaset A 2 Handset - Siemens Gigaset A 200 Manual

Registering and de-regestering handsets

You can register up to six handsets with your base station.
Registration of a Gigaset A 2 handset that has not yet been registered with a base sta-
tion takes place automatically. You must register manually all handsets from the 1000,
2000, 3000 and 4000 Gigaset ranges, as well as C1, C2 and S1 Gigaset handsets and
those from other manufacturers.

Automatic registration: Gigaset A 2 handset

Automatic registration with a base station is only possible for those handsets supplied
with it that have never been registered before.
For first-time registration, place your handset with its display to the front in the base
station. The registration process lasts about a minute, with all symbols flashing in the
display. The handset automatically receives the first unallocated internal number (1-6).
After successful registration this number is shown in the top left of the display, e.g. "1".
That means that the handset has been given the first internal number. If the internal
numbers 1 to 6 have already been allocated (if six handsets have already been regis-
tered with a handset), number 6 is de-registered and replaced.

Manual registration: Gigaset A 2 handset

You must activate manual registration of the handset at both the handset and the base
station.
1. At the handset
[_______________]
MENU
[__________] [______________________________________________] [__________]
REGISTER HS
[______]
OK
During the following registration process, all symbols will flash in the display.
2. At the base station
Within 60 secs. of entering the system PIN
After successful registration the handset is automatically allocated the next free
number, as described in the section "Automatic registration" (see above).
Registering and de-regestering handsets
Press display key to open menu.
Select and confirm.
OK
Enter the system PIN for the base station
(default setting: 0000) and confirm.
press the registration/paging key on the front of the
base station for approx. 3 secs.
The registration process then starts.
33