Siemens Gigaset SX303isdn User Manual page 19

Preparing the base station for use
Example of how to assign an MSN:
You have applied for four MSN's, two for business use (MSN1, MSN2) and two for private
purposes (MSN3, MSN4). Four handsets are connected to a base station. Two handsets
(Int.11 and 12) and the answering machine AM 91 are intended for business use, and
two handsets (Int.13 and 14) and the answering machine AM 92 are intended for
private use.
Internal users
handsets
Answering
machine
Handset
Handset
Answering
machine
Ring delay
When ring delay is activated, an incoming call is signalled on the base station after a
delay (e.g. after 5 ring cycles – the number is adjustable). Ring delay can be set
individually for each internal subscriber and for each receive MSN (page 105).
In the example, an incoming call to MSN1 is only to be signalled on handset Int.11 if
Int.12 does not answer the call. To achieve this, activate a ring delay for Int.11 and
MSN1 (e. g. 5 ring cycles). The call for MSN1 is signalled directly on Int.12, but is only
signalled on Int.11 after the 5th ring cycle.
Launching the Getting started wizard and setting the basic settings
You can operate the Getting started wizard for your base station either directly using the
base station or using an S44, S1 or SL1 handset.
Launching the Getting started wizard:
i
s
Set base
s
Installation
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
YES
~
OK
16
Use
Int.11, 12 Business
AM 91
Int.13 Private
Int.14
AM 92
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Press the display key to launch the Getting started
wizard.
If you already have set a system PIN (not 0000)
(page 91), you will be asked to enter it.
If required, enter the system PIN and confirm.
Receive MSN
MSN1 MSN2
,
MSN1 MSN2
,
MSN3
MSN4
MSN3 MSN4
,
Send MSN
MSN1
---
MSN3
MSN4
---