Siemens Gigaset SX303isdn User Manual page 34

Make a call to the internal user:
either ...
~
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
LIST
s
INT11: Int.11
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
BACK
either ...
s t
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
CONF.
or ...
Toggling
Precondition: You have established an enquiry call (page 29 and page 30).
There is both an active call (the one established with an enquiry call) and a held call (the
first). You can speak to both callers one at a time.
Use s t to switch between the two callers.
An external party hears the set-up waiting melody in a connection on hold (page 107)
when the connection is on hold internally (page 106). An internal user in a connection
on hold does not hear a waiting melody.
Ending an enquiry call/toggling
either ...
i
s
End
or ...
a
Enter the number of the internal user you want.
Press the display key.
Select the required internal number,
OK
e.g. INT11: Int.11, and confirm.
The connection to the internal user is established.
The internal user dialled is busy:
Press the display key to return to the external party.
The internal user has answered:
Toggle (page 31):
Switch between call parties using display keys.
Conference call (page 32):
Press the display key to establish conference
switching.
Transfer the call (page 33).
End the call that is currently active:
Open the menu.
Select the menu item and confirm. You return to the
OK
waiting caller.
Replace the receiver (return to idle status).
The active connection is ended. You will
automatically be called again by the person on hold.
Functions during a call
31