Setting Up An Internal Group Call Group - Siemens Gigaset SX303isdn User Manual

System settings
By default, automatic call diversion is not set up.
i
s
Set base
s
Settings
~
OK
s
ISDN settings
s
Auto.forwarding
s
MSN1:
~
Save entry
j
The set up call diversions for which automatic diversion is set are indicated in the call
diversion list.

Setting up an internal group call group

You can make a group call from any telephone registered on the base station to all other
registered internal users (page 22).
By default, all registered users with the device type Telephone or Neutral are set up in
the group call group.
i
s
Set base
s
Settings
~
OK
s
Setup user
s
Setup device
s
INT11: Int.11
s
Hunt group
j
104
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
W
Select MSN and open submenu, e.g. MSN1: Anna.
W
Enter destination number and open the submenu.
Confirm. Automatic call diversion is activated
OK
(‰ = on).
Hold down (back to idle status).
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN if required (page 91).
Select the menu item and confirm.
OK
Confirm.
OK
W
Select internal number and open submenu,
e.g. INT11: Int.11.
Select the menu item and confirm (
OK
Hold down (back to idle status).
‰
= activated).