Remote Control - Siemens Gigaset SX303isdn User Manual

Operating the answering machine (on SX353isdn)

Remote control

You can control your answering machine remotely from a registered handset or any
external connection or mobile telephone, e.g., to play back and delete messages. Apart
from the first step, the procedure is the same for both kinds of remote control.
Precondition:
Remote control from an external connection is only possible if you have defined an
◆
AM PIN (page 80). You must always enter the AM PIN when operating from an
external device.
To be able to operate an answering machine from an external device fully (change
◆
settings, delete messages) you must enable remote control and remote delete (see
below).
Notes on remote control
If a function requires two keys to be pressed, then you must press both keys within
4 seconds. Otherwise the entry is terminated or only the function of the second key is
carried out. If you press the wrong key first you can press E to cancel the wrong entry.
You can call up voice-guided help for some functions:
0 ;
: ;
F ;
9 ;
Enabling remote control and remote delete
When the phone is supplied, remote control and remote delete are deactivated.
You must enter the settings for each of the three answering machines you wish to
operate remotely.
Preconditions:
You have selected an answering machine (page 63).
◆
To activate Remote control: You have assigned a PIN to the selected answering
◆
machine (page 80).
s
Settings
s
Remote options
Remote control
s
Remote delete
72
Help with deletion
Help with new messages/phrases
Help with recording
Help with different operating modes
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Set remote control:
Select the menu item and confirm
OK
‰
( = activated).
If required, set remote delete:
Select the menu item and confirm
OK
‰
( = activated).