Shift Lever Lock Release And Safety Mode Reset; How To Release The Shift Lever Lock - SSANGYONG NEW CHAIRMAN Owner's Manual

SHIFT LEVER LOCK RELEASE AND SAFETY MODE RESET

HOW TO RELEASE THE SHIFT LEVER LOCK

1. Apply the parking brake firmly and turn the ignition off.
2. Push the shift lock release lever by inserting the proper
stick. Then, while stepping on the brake pedal, move the
shift lever to "N".
3. Start the engine, release the parking brake, and place the
shift lever to the "-D+" position.
WARNING
• If the automatic shift lever does not move out of
steps mentioned above and take the vehicle to a Ssangyong Dealer
or Ssangyong Authorized Workshop. Have the vehicle checked
and repaired.
• The brake pedal must be depressed when you try to move the
shift lever.
Page 15
Symptoms after Resetting of the Safety Mode
• Heavy shock when moving the shift lever
• Decreased driving force while driving at a high speed
• Decreased driving force while driving at high speed /
Fixed gear position during driving
• Instrument cluster displays "D" other than "D
the shift lever is in "-D+" position.
If one of these symptoms happens, reset the automatic trans-
mission safe mode.
How to Reset the Safety Mode
1. Park the vehicle and place the shift lever to the
2. Stop the engine and wait for over 10 seconds.
3. Start the engine.
WARNING
If abnormal operation of the transmission (fixed at the 2nd forward
"D"
gear in the
still exists, have the system checked at the nearest Ssangyong Dealer
or Ssangyong Authorized Workshop.
"P"
, take the
2006-10-02, ¿ÀÈÄ 5:59
" even when
1
"P"
"R"
position or the 2nd reverse gear in the
IN CASE OF EMERGENCY
position.
position)
11-15