SHIFT LEVER LOCK RELEASE AND SAFETY MODE RESET
SHIFT LEVER LOCK RELEASE
Page 21
If the gear shift lever does not move from the
in spite of turning the ignition key to the
depressing the brake pedal, take the following steps to
manually shift the lever.
1. Stop the engine and apply the parking brake.
2. Remove the shift selector cover. While pressing the so-
lenoid valve section, shift the lever into the
3. While the shift lever is engaged in the
the engine. Release the parking brake, shift the lever into
"D"
the
position and drive off.
WARNING
"P"
If the shift lever is stuck in the
position, take the above steps
to drive your vehicle. Then, you must have your vehicle checked
by Ssangyong Dealer or Ssangyong Authorized Service Center.
IN CASE OF EMERGENCY
2006-10-02, ¿ÀÈÄ 3:08
0
"P"
position
1
"ON"
position and
2
3
4
"N"
position.
5
"N"
position, start
6
7
8
9
10
11
12
13
14
15
16
12-21