SSANGYONG NEW CHAIRMAN Owner's Manual page 209

7. Raise the vehicle by rotating the jack connection rod
clockwise until the tire is off ground about 3cm.
8. Remove all wheel nuts and wheel. For rear tire, release
the parking brake carefully and remove the tire. Put the
removed tire under the vehicle.
9. Install the wheel centering pin to one of the wheel nut hole.
10. Fit the spare tire to the wheel centering pin and tighten
the nut temporarily.
11. Remove the wheel centering pin and tighten the other
nuts temporarily.
12. Lower the vehicle by rotating the jack handle counter-clock-
wise (until the tire touches the ground. Remove the jack)
and tighten the wheel nuts diagonally a couple of times.
13. Put the removed tire in the trunk and place tools in place.
IN CASE OF EMERGENCY
11-10
Page 10
If over tightened, the wheel nuts could be damaged. Do not
overtighten the wheel nuts by pressing the wheel nut wrench
by foot or using an assist pipe.
WARNING
Improperly tightened wheel nuts can cause the wheel to become
loose and even come off or any malfunctioning in the steering
and braking system.
Using different tires could cause you to lose control while driving.
Be sure to use the same size and type tires from the same manu-
facturer on all wheels.
After changing the tire and driving the vehicle about 1000 km, have
your vehicle checked and repaired at the nearest Ssangyong Au-
thorized Workshop or a tire specialized shop.
2006-10-02, ¿ÀÈÄ 5:59