Shift Lever Lock Release And Safety - SSANGYONG KYRON User Manual

SHIFT LEVER LOCK RELEASE AND SAFETY MODE RESET
Shift Lever Lock Release
1. Apply the parking brake firmly and turn the ignition off.
2. Push the shift lock release lever by inserting a proper stick.
Then, with the brake pedal depressed, move the selector
"N"
lever to .
3. Start the engine, release the parking brake, and place the
"-D+"
selector lever to the position.
WARNING
• If the automatic gear selector does not move out of "P", take the
steps mentioned above and take the vehicle to a Ssangyong dealer
or authorized service center. Have the vehicle checked and repaired.
• The brake pedal must be depressed when you try to move the
selector.
Page 17
Symptoms after Resetting of the Safety Mode
• Heavy shock when moving the selector lever
• Decreased driving force while driving at a high speed
• Fixed gear position during driving
If one of these symptoms happens, reset the automatic trans-
mission safe mode.
How to Reset the Safety Mode
1. Park the vehicle and place the selector lever to the
2. Stop the engine and wait for over 10 seconds.
3. Start the engine.
WARNING
If abnormal operation of the transmission (fixed at the 2nd forward
"-D+"
gear in the position or the 2nd reverse gear in the
still exists, have the system check by a Ssangyong Dealer or
Ssangyong Authorized Service Center.
IN CASE OF EMERGENCY
2006-10-03, ¿ÀÈÄ 2:36
0
1
2
3
4
5
6
"P"
position.
7
8
9
10
"R"
position)
11
12
13
14
15
16
12-17