Cooling/Heating Switch For Cup Holder - SSANGYONG NEW CHAIRMAN Owner's Manual

COOLING/HEATING SWITCH FOR CUP HOLDER

Cool/Hot indicator
COOL & HOT switch
To use the cup holder, pull it out. Remember to push it back
in after using.
The cooling/heating function operates only when the cup
holder is out, and stops after the cup holder is pushed in. It
also stops when the engine is turned off.
If there is a cup in the cup holder with the cooling/heating
function in operation, the inner side of the holder gets cool or
warm to keep the beverage fresh.
CAUTION
Sudden brake or start may spill liquid in the vehicle.
Be careful of burns! Do not store a hot beverage in the cup holder.
Keep the cup holder pushed in when not in use.
Page 25
OFF Cooling
(lamp off) (blue light on) (lamp off)
To choose the desired 'Cooling/Warming' position or power OFF,
just press the button as you seen in the above.
The indicator blinking in purple indicates a malfunction in the
system.
Cooling function
(blue LED on)
Activate the cooling function by pressing the COOL & HOT switch.
The inner side of the cup holder gets cool in 10 - 15 minutes.
Heating function
(red LED on)
Activate the heating function by pressing the COOL & HOT switch.
The inner side of the cup holder gets warm in 10 - 15 minutes.
CAUTION
The cup holder is not waterproof. If liquid is spilled on the cup
holder, wipe it dry immediately.
Do not touch the inner side of the cup holder when the heating
function is in operation. You may get burned.
A blinking indicator indicates system malfunction. Have the system
checked at the nearest Ssangyong Dealer or Ssangyong Autho-
rized Workshop.
INTERIOR SWITCHES
2006-10-02, ¿ÀÈÄ 5:57
OFF Heating
(red light on)
4-25