READING LAMP (WITH SUNROOF)
Operation
Press the switch once to turn on the lamp.
Replcement
1. Remove the ignition key from the key cylinder.
2. Remove the lens by carefully prying off the slot of the lens
with a small flat blade screwdriver. Do not pry off the edge
of the lens.
3. Replace the bulb with new one in accordance with speci-
fied rating.
4. Snap the lens back in place.
LAMPS
13-10
Page 10
READING LAMP (WITHOUT SUNROOF)
Operation
Press the switch once to turn on the lamp.
Replcement
1. Remove the ignition key from the key cylinder.
2. Remove the lens by carefully prying off the slot of the lens
with a small flat blade screwdriver. Do not pry off the edge
of the lens.
3. Replace the bulb with new one in accordance with speci-
fied rating.
4. Snap the lens back in place.
2006-10-02, ¿ÀÈÄ 6:00