Shift Lever Lock Release And Safety Mode Reset - SSANGYONG 2010 Kyron User Manual

SHIFT LEVER LOCK RELEASE AND SAFETY MODE RESET

HOW TO RELEASE THE SHIFT LEVER LOCK
1. Apply the parking brake firmly and turn the ignition off.
2. Depress the brake pedal and push down the shift lock
release lever with a stick such as a pen. Then, shift the
lever to other position.
3. Start the engine, release the parking brake, and place the
"D"
selector lever to the
WARNING
• If the automatic gear selector does not move out of "P", take the
steps mentioned above and take the vehicle to a Ssangyong
dealer or authorized service center. Have the vehicle checked
and repaired.
• The brake pedal must be depressed when you try to move the
selector.
position.
Symptoms after Resetting of the Safety Mode
• Heavy shock when moving the selector lever
• Decreased driving force while driving at a high speed
• Fixed gear position during driving
• If the safety mode is activated, the shift indicator dis-
plays "D".
If one of these symptoms happens, reset the automatic
transmission safe mode.
How to Reset the Safety Mode
1. Park the vehicle and place the selector lever to the
position.
2. Stop the engine and wait for over 10 seconds.
3. Start the engine.
WARNING
If abnormal operation of the transmission (fixed at the 2nd (4th)
"D"
forward gear in the position or the 2nd (1st) reverse gear in
"R"
the position)still exists, have the system check by a
Ssangyong Dealer or Ssangyong Authorized Service Center.
IN CASE OF EMERGENCY
0
1
2
3
4
5
6
7
"P"
8
9
10
11
12
13
14
15
16
12-17