Amb Switch - SSANGYONG NEW CHAIRMAN Owner's Manual

AMB switch

Defrost Switch
Pressing the AMB switch The
makes the display show main air flow to the windshield
the ambient temperature for faster defrosting. It also
for 5 seconds.
overrides any Mode selection
you may have made.
CAUTION
When you select this switch,
The value shown on the
the A/C turns on automatically
display may differ from the
and the system selects Fresh
actual temperature due to
Air
the heat from the engine or
temperature, A/C, Defrost indi-
ground.
cator and fan speed will
display, and the indicator
above the switch will lit.
Page 11
Defrost switch
Use this switch for quick defrosting. When you press this
switch, the airflow direction will be changed to the windshield
and door glasses, the air conditioner operates automatically,
and air from the outside comes in. Pressing the switch again
during its operation returns the operation back to normal.
Inside of the Windshield
1. Press the defroster switch.
2. Adjust the fan speed with the fan speed control.
3. To quickly remove the moisture on the glass, set the fan
speed button at a high speed position.
4. To prevent fog from forming on the glass, setting the air source
selection switch to the fresh air intake mode is recommended.
Outside of the Windshield
switch directs the
1. Press the defroster switch.
2. Adjust the fan speed with the fan speed control.
3. To quickly remove the frost on the glass, set the fan speed
button at a high speed position.
4. Set the temperature control switch to a hot position.
With rain or highly humid condition, windshield or other windows
mode. The adjusted
get fog even when the air conditioner is working. If windows are
foggy, it is dangerous to drive because of poor frontal and side
visibilities. In this case, select fresh air intake mode and air flow mode
switch to vent (
VENTILATION, HEATING AND AIR CONDITIONING
WARNING
).
2006-10-02, ¿ÀÈÄ 5:58
9-11