Position Memory Setting - SSANGYONG NEW CHAIRMAN Owner's Manual

POSITION MEMORY SETTING*

To store the memory settings
1. Position the transmission shift lever to
tion switch "ON" (for your safety, do not start the engine).
2. Adjust the driver's seat, steering wheel, outside mirrors
and interior rearview mirror to the desired positions.
3. Press ( : (A)) switch. The indicator on the switch comes
on.
4. Within 5 seconds, press the button (
you want to set.
IT CAUTION
Never operate any of the driver's seat, steering wheel, outside mirrors, or interior rear-
view mirror during memory setting, otherwise memory setting is cancelled.
If you do not press within 5 seconds after pressing set switch, memory setting is cancelled.
Page 7
Memorized
with the igni-
, , )
The position memory is available for up
to three drivers. Each driver can set his/
her own driver's seat, steering wheel,
outside mirrors and interior rearview
mirror positions and it will be sepa-
rately stored in the integrated computer.
If somebody has moved the seat, the
memory positions can be recalled auto-
matically by pressing the position button.
To operate the memory settings
1. Position the transmission shift lever to
the ignition switch "ON" (for your safety, do not
start the engine).
2. Press and hold the button ( ,
the driver's seat, steering wheel, outside mir-
rors and interior rearview mirror start to move.
3. Wait until they stop moving.
SEATS AND CONTROLS
2006-10-02, ¿ÀÈÄ 5:58
with
, ),
7-7