How To Check And Replace Fuse - SSANGYONG NEW CHAIRMAN Owner's Manual

HOW TO CHECK AND REPLACE FUSE

1. Turn off all electrical systems and remove the ignition key
from the key cylinder.
2. Open the fuse and relay box cover.
3. Locate the blown fuse.
4. Pull out the relevant fuse using the fuse puller.
5. Visually check whether it is blown or not.
6. If normal, insert it in place.
7. If blown, check its capacity and replace it with the same
capacity.
Page 23
Higher amperage
Normal
WARNING
The use of anything other than the specified fuse could cause
damage to the electrical system and even cause a fire.
The use of different types or different rating fuses could cause
damage to the electrical system and even cause a fire. Always
replace a fuse with the one with the same rating.
NOTE
The underhood fuse and relay box has some spare fuses. Re-
plenish the fuses immediately as you use them. The fuse rating is
indicated on the upper surface of the fuse.
SERVICE AND MAINTENANCE
2006-10-02, ¿ÀÈÄ 6:00
Specified amperage
Blown
12-23