Front Fog Lamp; License Plate Lamp - SSANGYONG NEW CHAIRMAN Owner's Manual

FRONT FOG LAMP

1. Turn off the lamp switch and remove the ignition key from
the key switch.
2. Remove the cover by turning it.
3. Disconnect the connector by releasing the locks at both
sides.
4. Replace the bulb with a new one.
5. Install in the reverse order of removal.
CAUTION
The fog lamp bulb should be replaced only at the Ssangyong dealer
or an authorized service center.
LAMPS
13-6
Page 6

LICENSE PLATE LAMP

1. Turn off the lamp switch and remove the ignition key from
the key switch.
2. Remove the two fastening screws on the license plate lamp.
3. Remove the lamp housing by turning the connector.
4. Remove the bulb by pulling it upward and replace it with a
new one.
5. Install the new bulb in the reverse order of removal.
2006-10-02, ¿ÀÈÄ 6:00