Replacement Of Exterior Lamps; Headlamp And Position Lamp - SSANGYONG NEW CHAIRMAN Owner's Manual

REPLACEMENT OF EXTERIOR LAMPS

HEADLAMP AND POSITION LAMP

1. Turn off the lamp switch and remove the ignition key from
the key switch.
2. Open the engine hood.
3. Remove the horn by unscrewing the horn mounting bolt
(1) and separate the headlamp from the vehicle body by
unscrewing the three headlamp mounting bolts (2).
Low beam
High beam
Page 5
4. Disconnect the two connectors and remove the headlamp.
5. Remove the headlamp cover from the detached headlamp.
6. Disconnect the headlamp connector and release the bulb
fixing clip.
7. For the position lamp, remove its housing by turning it and
remove the bulb from the housing.
8. Replace the bulb with a new one and install in the reverse
order of removal.
WARNING
Do not attempt to replace the headlamp by yourself.
CAUTION
The headlamp bulb should be replaced only at the
nearest Ssangyong dealer or Ssangyong Authorized
Position lamp
Workshop.
2006-10-02, ¿ÀÈÄ 6:00
LAMPS
13-5