Automatic Transmission Safety Mode; Indications That The Vehicle Is In Safety Mode; Resetting Safety Mode - SSANGYONG NEW CHAIRMAN Owner's Manual

AUTOMATIC TRANSMISSION SAFETY MODE

INDICATIONS THAT THE VEHICLE IS IN
SAFETY MODE
When the transmission has an electric or mechanical fault,
the transmission operates in safety mode to maintain mini-
mum driving conditions and to prevent damage to the
transmission.
If the transmission has an electric or mechanical fault, the
following symptoms can happen:
Heavy shock when moving the shift lever
Decrease in the vehicle's driving force
Current gear fixed and no acceleration regardless of the
depressing of accelerator pedal
"D", not "D ", is displayed on the indicator when moving
1
the shift lever to "D"
Page 13

RESETTING SAFETY MODE

How to reset the safety mode
1. Stop the vehicle and move the shift lever to the "P" position.
2. Stop the engine and wait for over 10 seconds.
3. Start the engine.
Symptoms after resetting the safety mode
Trouble has been corrected if the vehicle operates normally
after resetting.
The gear may be fixed at the second forward gear in "D"
position or the second reverse gear in the "R" position.
When this happens, have the vehicle checked at the near-
est Ssangyong Dealer or Ssangyong Authorized Workshop.
CAUTION
If you find any symptom caused by mechanical or electrical de-
fects in transmission, stop the vehicle immediately and reset the
safety mode.
If there is still a mechanical or electrical problem despite the reset,
have the system checked at the nearest Ssangyong dealer or
Ssangyong Authorized Workshop.
If there is still any mechanical or electrical defect in transmission
after resetting, stop the vehicle immediately and have the system
checked at the nearest Ssangyong dealer or Ssangyong Autho-
rized Workshop.
TRANSMISSION AND CONTROLS
2006-10-02, ¿ÀÈÄ 5:57
6-13