To Use Machine When Power Save Led Lights - Konica Minolta BIZHUB PRO 1050E Operator's Manual

2
2.3

To Use Machine When Power Save LED Lights

If you find the Power Save LED lit on the control panel, the machine cannot
be operated due to the Power Save or Weekly Timer function.
% Press [Power Save] on the control panel.
If Power Save has been activated, the machine will become available
for copying operation.
Note
Power Save function has two modes; Auto Low Power and Auto Shut-
Off. See the following description for details.
This function can also be activated manually. For details, refer to "Using
Power Save Manually" on page 2-28.
If Weekly Timer has been activated, the Machine Status Screen will appear
with the message "Timer interrupt mode / Please input password" displayed
in the message area, and the machine operation will be available temporarily
by the Timer Interrupt function. For details, refer to "When Weekly Timer Is
Activated" on page 2-30.
2-26
Preparation for Use
bizhub PRO 1050/1050e