Konica Minolta BIZHUB PRO 1050E Operator's Manual page 336

9
Note
Changing output trays is described separately. For details, refer to "Se-
lecting an Output Tray" on page 9-8.
2
Select an output mode.
- For non-sort output, cancel both [Collated] and [Uncollated].
- For collated output, touch [Collated] to select it.
- For uncollated output, touch [Uncollated] to select it.
- Select output face (Face Down / Face Up), and output order (1 to N
/ N to 1) as needed.
3
Touch [OK] on the Output Application Screen.
The icon of the specified output application appears on the Copy
Screen.
Reminder
The primary (main) tray gradually goes down while printed materials out-
put. DO NOT allow any object to interfere with the operation of the tray
on the left side of the finisher, as any interference may cause damage to
the finisher.
Reminder
Be careful not to exceed the finisher tray capacity when selecting the
print quantity, otherwise unexpected trouble may be caused.
9-18
Setting Output Methods
bizhub PRO 1050/1050e