Konica Minolta BIZHUB PRO 1050E Operator's Manual page 753

Machine Manager Setting
Procedure
1
Touch [04 Network Setting] - [02 Controller NIC Setting] - [05 SNMP].
2
For each item, select or enter a required value.
- SNMP
Select to use SNMP.
- Read Community Name
Touch [Read Community Name] to display an input screen. After
entering in the field, touch [OK].
- Write Community Name
Touch [Write Community Name] to display an input screen. After
entering in the field, touch [OK].
3
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
4
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
5
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
bizhub PRO 1050/1050e
17
17-97