Using Folding Unit Fd-501 - Konica Minolta BIZHUB PRO 1050E Operator's Manual

9
9.6

Using Folding Unit FD-501

There are three elements for output settings:
- Intermediary processing
- Output mode
- Output tray position
The Folding Unit FD-501 does the intermediary processing, while Finisher
FS-503/Saddle Stitcher SD-501/Perfect Binder PB-501 sets an output mode
and changes output tray position.
The following punch/folding patterns are available:
- Punch:
2 or 4 holes can be punched in sheets for filing purposes. Set left/right/
top position according to the placement of sheets.
Folding:
-
Six folding types are available - Z-Fold, Letter Fold-in, Letter Fold-out,
Double Parallel, Gate, and Folding. Choose to print outside the fold (out-
side print) or inside (inside print) for each folding mode except Z-fold.
This section describes how to set intermediary processing for punching
holes in copies and folding copies.
80 mm
80 mm
9-28
Z-Fold Letter Fold-out
Letter Fold-in Double Parallel
Setting Output Methods
Gate
Folding
bizhub PRO 1050/1050e