Default Settings - Konica Minolta BIZHUB PRO 1050E Operator's Manual

18

18.11.3Default Settings

General Settings
This screen appears when you click [General Settings] under the [Default
Settings] menu of the [Print] tab. The screen is used to set default values for
printer settings, that are not associated with PDL. If there is no command
from the driver, this setting will be applied. These settings also appear if you
select Controller Settings on the touch panel's Device Status screen - 02
Printer Settings - 01 Basic Settings.
- Enter for individual items.
PDL, Input Tray, Output Tray, Duplex, Binding, Staple, Punch, Center
Staple / Centerfold / Trimming, Offset, Output Order, Print Number, Col-
late, Paper Size, Orientation, Resolution, Spool Setting, Banner Option,
Banner Page Tray, Convert Paper Size, 1 Page/Sheet, Booklet, Print Po-
sition.
- [Apply] button:
Click the button to apply the new settings.
- [Clear] button:
Click the button to clear the settings that were entered.
18-54
Browser Control Setting
bizhub PRO 1050/1050e