Konica Minolta BIZHUB PRO 1050E Operator's Manual page 742

17
- Network Speed
Select an appropriate key.
- TCP/IP RAW port settings
Touch an appropriate RAW port number to display a touch panel
keypad input screen. After entering in the field, touch [OK].
To specify to use individual ports or not, select [Use] or [Not Use] to
the right of each RAW port key.
- TCP/IP Filter permission settings
To specify to use the permission settings or not, select [On] or [Off]
to the right of [Permission Setting]. To specify the range of permit-
ted connections, touch an appropriate setting range key to display
an address input screen. After entering in the field, touch [OK].
- TCP/IP Filter denial settings
To specify to use the denial settings or not, select [On] or [Off] [Off]
to the right of [Denial Setting]. To specify the range of denied con-
nections, touch an appropriate setting range key to display an ad-
dress input screen. After entering in the field, touch [OK].
- Network Test Ping Address
To enter an address, touch [Network Test Ping Address] to display
an address input screen. After entering in the field, touch [OK].
Touch [Send] to perform the network test. Any event of error
prompts [Error] in the message box.
3
Touch [OK] to complete the settings and return to the Controller NIC
Setting Menu Screen.
4
Touch [Return] to specify other settings, or touch [Exit] to finish setting.
5
After you have changed the settings, turn off the sub power, then turn
off and on the main power.
!
Details
When you turn off and on the main power, you need to wait at least 10
seconds to turn on after turning off. If you do not allow a sufficient interval
in between, the machine may not run correctly.
17-86
Machine Manager Setting
bizhub PRO 1050/1050e