Konica Minolta BIZHUB PRO 1050E Operator's Manual page 102

4
3
Remove the staple cartridge.
Pull down the handle of the staple
cartridge to draw it downward.
4
Set the staple roll into the staple cartridge.
- Open the staple cartridge cover,
then set the staple roll into the
cartridge.
- Close the cover, then remove the
lock tape pulling it in horizontal
direction.
Reminder
Do not pull the lock tape upward, oth-
erwise the tape may rip and remain in-
side the cartridge so that the staples
cannot be used.
5
Set the staple cartridge.
- Return the staple cartridge to its
original position as shown below.
- Push up and in to secure it in
place.
4-18
Supplies & Handling
bizhub PRO 1050/1050e