Konica Minolta BIZHUB PRO 1050E Operator's Manual page 538

13
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [06 Perfect Binder Ad-
justment].
2
Touch [02 Cover Lead Edge Adjustment] to display the Cover Lead
Edge Adjustment Screen.
3
Touch [Main Tray] or [PB Tray] to select the tray to feed the cover.
4
Touch [Next] or [Back] to select the paper size of the body set to be at-
tached with the cover.
Touching [Next] continuously will change the paper size as follows.
All Size - 8.5x11 - 5.5x8.5R - A4 - A5R - B5 - A5 - 5.5x8.5 - Special -
16K - 8.5x11W - 5.5x8.5W - A4W - A5W - B5W
5
Touch the [COPY] tab to display the Copy Screen.
6
Select the PB tray or desired main body tray if selected in step 3, then
press [Start].
A sample pattern of perfect-bound book will be output.
7
Check that the edge of the left cover page extends out of the body set
by the desired amount.
Left cover page
Right cover page
8
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
9
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -128 (short) to +127 (long), 1 step = 0.1 mm
10
Repeat the adjustment steps from 3 to 9 until the desired result is ob-
tained.
13-80
Length differential
Edge of the left cover paper
Body pages
Adjustment
bizhub PRO 1050/1050e