To Use Machine When Power Save Led Lights - Konica Minolta bizhub pro C6500P User Manual

Hide thumbs Also See for bizhub pro C6500P:

Table of Contents

To Use Machine When Power Save LED Lights

If you find the Power Save LED lit on the control panel, the machine cannot

be operated due to the Power Save or Weekly Timer function.

To activate the machine

Press any key on the control panel.

If the machine makes no re-

sponse, press [Power Save].

If Power Save has been activated,

the machine will become available

for operaions.

If Weekly Timer has been activated,

the Machine Status Screen will ap-

pear with the message "Timer interrupt mode/ Enter password" dis-

played in the message area, and the machine operation will be

available temporarily by the Timer Interrupt function. See page 2-42 for

The Power Save function has two modes: Auto Low Power and Auto

Shut-Off. See the following description for details.

This function can also be activated manually. For details, see page 2-41.

Preparation for Use

bizhub PRO C6500P