Konica Minolta BIZHUB PRO 1050E Operator's Manual page 721

Machine Manager Setting
- Touch [Belong Section] to display the screen to select a section be-
long to. Touch [Next] or [Previous] to display the desired section
name, touch to highlight it, then touch [OK].
!
Details
When [User/Section Auth. Connect] is set to On on the Authentication
Method Setting Screen, [Belong Section] can be specified.
- Touch any key on the right side of [Usable Function] to select the
job necessary to authenticate a newly registered user.
- Touch [OK] to complete the setting.
To add user settings:
- Touch [Add] to display the Add Registered User Screen.
- Touch [User No.] to display the input screen. Enter the user number
and touch [OK. You may enter four digits for the section number.
- Touch [User Name] to display the input screen. Enter the user name
and touch [OK]. You may enter eight letters for the section name.
For the details on entering texts in the input screen, see the appen-
dix.
- Touch [Password] to display the input screen. Enter the password
and touch [OK]. You may enter eight digits for the password. For
the details on entering texts in the input screen, see the appendix.
- Touch [Belong Section] to display the screen to select a section be-
long to. Touch [Next] or [Previous] to display the desired section
name, touch to highlight it, then touch [OK].
!
Details
When [User/Section Auth. Connect] is set to On on the Authentication
Method Setting Screen, [Belong Section] can be specified.
- Touch any key on the right side of [Usable Function] to select the
job necessary to authenticate a newly registered user.
- Touch [OK] to complete the setting.
To delete user settings:
- Touch [Next] or [Previous] to display the user name to be deleted
and touch to highlight it.
- Touch [Delete] to display the Delete Confirmation popup screen.
- Touch [Yes] to delete, or touch [No] to cancel.
bizhub PRO 1050/1050e
17
17-65