Konica Minolta BIZHUB PRO 1050E Operator's Manual page 738

17
Specify the SNMP Trap setting. For details, refer to "15 SNMP Trap" on
page 17-123.
Specific setting and Description
15 SNMP Trap
SNMP Trap Tranmission
Specify to transmit SNMP Trap or not.
Authentication Failure Trans
Specify to transmit by SNMP in the case taht any au-
thentication failure in Read Community Name or Write
Community Name of SNMP occurs.
Trans Address 1 - 5 Setting
Address SNMP Trap Trans
Specify to transmit the SNMP Trap or not.
SNMP Trap Trans Address
Specify the SNMP Trap transmission address.
SNMP Trap Trans Port No.
Specify the SNMP Trap transmission port number.
Trans Community Name
Specify the transmission community name.
Report Items
Select the desired items. (More than one item can
be selected.)
Trans IPX Setting
IPX SNMP Trap Transmission
Specify to transmit the IPX SNMP Trap or not.
Trap IPX Network Address
Specify the IPX network address.
Trans IPX Node Address
Specify the IPX node address.
Trans IPX Community Name
Specify the IPX community name.
Report Items
Select the desired items. (More than one item can
be selected.)
17-82
Machine Manager Setting
Setting options (highlighted: de-
fault)
On/ Off
On/ Off
On/ Off
0.0.0.0 (0 - 255)
1 - 65535 ( 162 )
Max. 15 alphanumerics/symbols
can be used.
8 items
Service Call/ Jam/ Paper Supply/
Toner Supply/ PM Call/ Staple Car-
tridge Supply/ Finisher Tray Full/
Dispose of Trash Basket
Clear All
On/ Off
00:00:00:00
Alphabet A to F and numbers can
be used (12 digits fixed).
00:00:00:00:00:00
Within 15 alphanumerics/symbols
Within 15 alphanumerics/symbols
8 items
Service Call/ Jam/ Paper Supply/
Toner Supply/ PM Call/ Staple Car-
tridge Supply/ Finisher Tray Full/
Dispose of Trash Basket
Clear All
bizhub PRO 1050/1050e