Using The Power Key; When Using The Power Key As A Power Save Key - Konica Minolta bizhub c3350 Quick Start Manual

2
2.2.3

Using the Power key

Press the Power key to switch this machine to Power Save mode.
You can select [Power Save] or [Sub Power OFF] as Power Save mode that is activated when the Power key
is pressed.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Set-
tings] - [Power Save Key] (default: [Power Save])

When using the Power key as a Power Save key

When the Power key is pressed, the status of this machine changes as shown below. Depending on how
long the Power key is pressed, the state of the power saving mode to be activated will differ.
Power key
Short press
Hold down
Related setting (for the administrator)
-
Press the Power key to select whether to switch to Low Power or Sleep mode.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save
Settings] - [Power Save Settings] (Default: [Low Power])
-
You can select whether Deep Sleep mode is activated to further reduce power use when this machine
is in Sleep mode. When the machine is in Deep Sleep mode, it will not return to Normal mode when the
user operates the Touch Panel. To return to Normal mode, press the Power key.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save
Settings] - [Power Consumption in Sleep Mode] (Default: [Enabled])
2-8
Status of Status of
this ma- LED
chine
Low Power Flash:
mode Blue
(Default)
Sleep mode Flash:
Blue
Sub Power Light up:
OFF Orange
About power supply
Description
Turns off the display of the Touch Panel to reduce pow-
er use.
This machine returns to Normal mode when it receives
data or faxes or when the user operates the Touch Pan-
el.
Provides a greater power saving effect than Low Power
mode. The time required to return to Normal mode is
longer than that from Low Power mode.
This machine returns to Normal mode when it receives
data or faxes or when the user operates the Touch Pan-
el.
Provides a greater power saving effect than Sleep mode.
While the sub power is turned off, this machine can re-
ceive data or faxes, however, it cannot scan or print an
original.
If data or faxes are received while the sub power is
turned off, they are printed when the machine returns to
Normal mode.
To enable the machine to return to Normal mode from
the Sub Power OFF status, press the Power key again.
2.2
[Quick Start Guide]