Konica Minolta BIZHUB PRO 1050E Operator's Manual page 280

8
4
Specify the erasure amount in the selected mode.
To specify Frame Erasure (All sides) amount:
%
Touch to highlight [Frame], if not highlighted, then use the touch panel
keypad or up/down arrow key to enter the desired erasure amount of
the Up, Down, Right, and Left sides collectively, from 1 to 300 mm in 1
mm increments.
% To specify Frame Erasure (Each side) amount:
Touch to highlight [Frame], if not highlighted, then touch [Up Side],
[Right Side], [Down Side], or [Left Side]. The selected side amount will
be highlighted in the left illustration area of the screen.
Use the touch panel keypad or up/down arrow key to enter the desired
erasure amount, from 1 to 300 mm in 1 mm increments.
8-56
Applications
bizhub PRO 1050/1050e