Konica Minolta BIZHUB PRO 1050E Operator's Manual page 593

Utility Screen Settings
02 Function Setting
05 Tandem Setting
01 Tandem Machine One Time Data Read
Set the tandem machine to receive all the data tran-
mitted from the master machine before starting to
print.
02 Tandem Machine Wait/Proof
Set the master machine to transmit the data to the
tandem machine at the time when the master ma-
chine starts scanning the data for proof copying.
03 Tandem Machine Shift Data Setting
Set the tandem machine to use the same shift value
used on the master machine.
04 Tandem setting after JOB completion
Select to continue or release the tandem mode after
the current tandem job is completed.
06 User Paper Selection
Select the user paper setting to be used when "User" is
specified as paper type.
bizhub PRO 1050/1050e
Setting options
(default is highlighted)
ON /OFF
Permit /Prohibit
Master Machine Shift data
dem Machine Shift data
Continue /Release
User Paper1 /User Paper2/User
Paper3
15
/Tan-
15-7