Konica Minolta BIZHUB PRO 1050E Operator's Manual page 541

Adjustment
Procedure
1
Touch [Adjustment] - [02 Finisher Adjustment] - [06 Perfect Binder Ad-
justment].
2
Touch [03 Spine Corner Forming Position Adjustment] to display the
Spine Corner Forming Position Adjustment Screen.
3
Touch the [COPY] tab to display the Copy Screen.
4
Select the PB tray or desired main body tray, then press [Start].
A sample pattern of perfect-bound book will be output.
5
Check that the position of spine corner of the cover is formed uniformly
against the scanning direction.
6
If the desired result cannot be obtained, touch the [ADJUSTMENT] tab.
7
Touch [Next] or [Back] to select (F) or (R) for the adjustment.
8
Use the touch panel keypad to enter the desired adjustment value, then
touch [Set].
Available range: -128 (down) to +127 (up), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is ob-
tained.
10
Touch [Return] to restore the Perfect Binder Adjustment Mode Menu
Screen.
bizhub PRO 1050/1050e
Left cover page
Spine
Right cover page
Horizontal scanning direction
13
13-83