Konica Minolta BIZHUB PRO 1050E Operator's Manual page 67

Preparation for Use
2
Enter the Timer Interrupt password, then press [Start].
- Enter a 4-digit Timer Interrupt password using the control panel
keypad.
- Press [Start].
Note
The Timer Interrupt password is to be specified in the machine manager
setting. Ask your machine manager for the password.
!
Details
If an invalid password is entered, continue by entering the valid 4-digit
password.
3
Set the hour for the interrupt use, then press [Start].
- Enter a 1-digit hour (ex. 3 for 3 hours) using the control panel key-
pad. (0 ~ 9)
- Press [Start].
4
Set the minute for the interrupt use, then press [Start].
- Enter a 2-digit minute (ex. 07 for 7 minutes) using the control panel
keypad. (00 ~ 59)
- Press [Start].
!
Details
Entering a number smaller than 5 will set the minute at 5. A number larger
than 60 is unavailable.
Copying is available until the set time is up.
bizhub PRO 1050/1050e
Timer interrupt mode
Please input password ####
Input copy time
3 hour(s) 05 minute(s)
Input copy time
3 hour(s) 07 minute(s)
2
2-31