Konica Minolta BIZHUB PRO 1050E Operator's Manual page 387

Setting Output Methods
The copier with [Tandem] highlighted will become the master machine;
the other copier will function as the tandem machine. The Master icon
displays on the Copy Screen of the master machine to indicate that the
two units are ready to work in tandem mode.
!
Details
The Tandem icon will display on the Copy Screen of the tandem machine
when [Start] is pressed on the master machine to start the tandem print-
ing operation.
The tandem mode cannot be selected/continued in the cases shown below.
The message "Please wait/ Reserve is not available in Tandem machine,"
"Tandem machine error/ Please check tandem machine," or "Please check
tandem machine" will be displayed, as required.
- The tandem mode cannot be selected while the tandem machine is in the
off state, due to Auto shut-off. Press [Power Save] to release it.
- Selected tandem mode will be released automttically when the tandem
machine activates Auto shut-off. Press [Power Save] to release it, then
select the tandem mode again to restart the procedure.
- When any problem occurs in the tandem machine, such as a paper mis-
feed or lack of paper, the tandem machine will be unavailable for printing;
however, the problem will not cause tandem mode to be released. Take
the appropriate troubleshooting measures to be ready for copying.
- Tandem printing job cannot be started if 100 reserve jobs (not in tandem
mode) are entered on the tandem machine. Wait until the reserve jobs are
completed on the tandem machine.
bizhub PRO 1050/1050e
9
9-69