Konica Minolta BIZHUB PRO 1050E Operator's Manual page 978

20
2
Turn OFF the sub power switch and main power switch.
3
Unplug the machine.
4
Contact your service representative and report the condition and report
code number.
!
Details
Limited Use of the Copier in Trouble
If the message shown below is displayed on the Call for Service Screen,
you may continue operating the copier on a limited function basis and uti-
lize the trays and ADU that are not affected by the trouble. To obtain this
limited functionality of the copier, consult your service representative. Be
sure to utilize the limited function only temporarily, and arrange for ma-
chine repair immediately.
1. If the limited use of the copier is available, the following message is dis-
played in the message area instead of the report code.
ex.
-- Tray 2 failure --
Press Reset to select except this tray
2. Press [Reset].
Make note of the report code.
Please switch Off/On
E 18-2
3. Turn OFF then ON the sub power switch.
A copying job can continue without using the troubled portion of the ma-
chine (ex. Tray 2).
7 CAUTION
% EVEN IF THE COPYING JOB CAN BE CONTINUED WITH THE ABOVE
OPERATION, BE SURE TO CONTACT YOUR SERVICE REPRESENT-
ATIVE IMMEDIATELY WHEN THE CALL FOR SERVICE SCREEN IS
DISPLAYED.
20-4
Troubleshooting
bizhub PRO 1050/1050e