Konica Minolta BIZHUB PRO 1050E Operator's Manual page 479

Adjustment
Procedure
1
Touch [Adjustment] - [01 Machine Adjustment] - [02 Timing Adjust-
ment].
2
Touch [04 ADF Restart Timing Adjustment] to display the ADF Restart
Timing Adjustment Screen.
3
Select the desired paper side using [Next] or [Back]. Each time [Next]
is selected, the display will switch as follows:
SIDE 1 - SIDE 2
Note
"SIDE 1" refers to the right side of the paper, while "SIDE 2" refers to the
reverse side.
4
Touch the [COPY] tab to display the Copy Screen.
5
Select A3 paper, place the original of which a misalignment can be eas-
ily monitored, then press [Start].
6
Check the misalignment by comparing the original and the output.
7
If there is the misalignment between the original and the output, touch
the [ADJUSTMENT] tab to return to the Adjustment Screen.
8
Use the touch panel keypad to enter an appropriate value, then touch
[Set].
Available range: -50 (fast) to +50 (slow), 1 step = 0.1 mm.
9
Repeat steps 3 to 8 until the desired result is obtained.
10
Touch [Return] to restore the Timing Adjustment Menu Screen.
bizhub PRO 1050/1050e
13
13-21