Positioning Originals; Positioning Originals In Radf - Konica Minolta KM-7145 Instruction Manual

Positioning Originals

Positioning Originals in RADF

The document feeder (RADF) automatically feeds up to 50 originals directly to the
platen area, starting with the top sheet. The RADF should only be used for unstapled,
smooth, flat originals.
Positioning originals in Normal mode
1.
Arrange originals in order.
• Before placing originals in the tray, be sure the document feeder is fully
• Be sure not to use unsuitable RADF originals. See p. 10-8 for details.
2.
Position original(s) FACE UP in the document feeder tray.
Place two-sided originals with page one FACE UP.
Up to 50 originals can be set at a time.
• Do not set more than 50 originals or set originals over the red line
• If the number of originals exceeds 50, divide them into blocks not
3.
Adjust paper guides.
3-2
closed. Once closed, do not open the document feeder, otherwise
selected copy conditions may be automatically altered.
indicated on the paper guides; otherwise a paper misfeed will occur.
exceeding 50 sheets, then load them from the block with the first page.
See p. 3-26 to p. 3-27.