Default Settings 2: Read Options, Trigger, Buzzer - Opticon OPI 4002 Specification Manual

Symbology Read
MicroPDF417
Micro QR
PDF417
QR Code
MSI/Plessey
UK/Plessey
S-Code
Telepen
Tri-Optic
Notes:
In the "Reading" column, " " means "Enable reading" and "X" means "Disable reading."
In the "Transmit code length" column, " " means "Transmit code length"
In the "Transmit CD" column, " " means "Transmit check digit"
In the "Calculate CD" column, " " means "Calculate check digit"
"— " means "not supported." In the "Prefix" column, "—" means "there is no prefix setting."

10.4. Default Settings 2: Read Options, Trigger, Buzzer

Item
Setting the number of characters
Read mode
Multiple label read
NW-7 intercharacter gap check
Trigger switch
Read time
Buzzer duration
Buzzer frequency
Buzzer loudness
Good read LED
Transmit Transmit
Code CD
Length
X X
X X X
X X
X X
X CD1
X
X
X
X
and "X" means "Do not transmit code length."
and "X" means "Do not transmit check digit."
and "X" means "Do not calculate check digit."
Fixed length OFF all codes
Multiple read
Disable
Up to 1 character
Enable
2 seconds (when trigger enabled)
200 ms
3kHz + 2.5 kHz
Loud
Indicator duration 200 ms
20
Calculate Set Set
CD Prefix Suffix
— CR
— CR
— CR
— CR
CD1 — CR
— CR
X — CR
— CR
X — CR
Default Setting
Opticon
OPI 4002
Specifications Manual
Other
Not transmit ST/SP