Default Settings 2: Read Options, Trigger, Buzzer - Opticon OPR 3001 Specifications

Notes:
•
In the "Reading" column, " " means "Enable reading" and "X" means "Disable
reading."
•
In the "Transmit code length" column, " " means "Transmit code length" and
"X" means "Do not transmit code length."
•
In the "Transmit CD" column, " " means "Transmit check digit" and "X" means
"Do not transmit check digit."
•
In the "Calculate CD" column, " " means "Calculate check digit" and "X"
means "Do not calculate check digit".

10.3. Default Settings 2: Read Options, Trigger, Buzzer

Setting the number of characters
Read mode
Multiple read reset time
Add-on wait mode
Multiple read
Multiple columns read
Redundancy
Trigger switch
Trigger repeat
Auto trigger
Read time
Margin check
Buzzer duration
Buzzer tone
Buzzer loudness
Buzzer timing
Startup buzzer
Indicator duration
Item
30
Default Setting
Fixed length OFF all codes
Multiple read
500 ms
500 ms
Disable multiple read
Disable multiple columns read
Read 1 times, redundancy = 0
Enable trigger
Disable trigger repeat
Disable auto trigger
2 seconds
Margin check normal
50 ms
3 kHz (single tone)
Maximum
Buzzer before transmission
Enable startup buzzer
200 ms
Opticon
OPR 3001
Specifications Manual