Page 2
Regulatory Approvals FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions.
Page 3
Opticon will repair or, at its opinion, replace products that prove to be defective in material or workmanship under proper use during the warranty period. Opticon will not be liable in cases where modifications are made by the customer. In such case the standard repair charge will be applicable.
2.3.2 Connect RS232 cradle.......13 2.3.3 Connect RS232 multicradle ....14 2.3.4 Connect USB to windows PC ....15 2.3.5 Connect RS485 multicradle network .16 DIP Switch settings......17 Bluetooth installation......18 2.5.1 Set or search Bluetooth device address:18 2.5.2 Security..........19 OPL972X/CRD972X OPTICON - 3...
RS485 connection. All slots have the same situation. As a tool to develop an application functionality. They charge the rechargeable Opticon can supply a compiler and a development battery as soon as the bar code data collector is kit. placed. Data will be transmitted to the host through RS232 or USB.
• Power supply, supplied as separate item (c) Do not remove the product label! On the back of every unit you will find a product label. This is attached by the manufacturer and includes product information and serial number. Do not remove it. OPL972X/CRD972X OPTICON - 5...
2. Indicator LED indicator or buzzer can be used to indicate results, for example bar code reading / status of communication / status of charging 3. LCD Display For displaying information 4. Operating key(s) Definable by application 6 - OPTICON OPL972X/CRD972X...
8. Optical window connection to second device Optical communication interface for data transmission 3. USB socket For connecting to PC, through Opticon USB cable 9. LED indicator Show current status. Read more at the installation 4. RS 485 socket instructions.
Using the bar code data type bar code data collector in the CRD972X collector while condensation is present can cause cradle. malfunction. Always wait until the condensation clears naturally before attempting operation. 8 - OPTICON OPL972X/CRD972X...
So do not try to take it apart. The manufacturer will not be liable for any damage caused by the customer. In case of serious malfunction, please consult your supplier. OPL972X/CRD972X OPTICON - 9...
(ref. 1) Use the cradle to charge battery The battery of Opticon can only be charged inside 2. Insert the handle cord of the strap into the thin the bar code data collector.
• Unlatch the case cover by lifting first into the direction of the nose and then lift up the case. Install Opticon battery: (ref. 3.) • Remove old battery. Insert new battery as instructed on the battery. Do not use force.
(ref. 2.) Connect power Connect the power supply. Switch on the power of the host computer. Place the bar code data collector in the cradle. LED indicator Typical LED indication: red: power is on 12 - OPTICON OPL972X/CRD972X...
Place the bar code data collector in the cradle. LED indicator Typical LED indications are: red: power is on flashing green: collector sends to host flashing yellow: host sends to collector FOR CONNECTING A NETWORK OF CRADLES SEE RS485 DESCRIPTION. OPL972X/CRD972X OPTICON - 13...
Place the bar code data collector(s) in the multicradle. LED indicator Typical LED indications are: red: power is on flashing green: collector sends to host flashing yellow: host sends to collector FOR CONNECTING A NETWORK OF MULTICRADLES SEE RS485 DESCRIPTION. 14 - OPTICON OPL972X/CRD972X...
2.3.4 CONNECT USB TO WINDOWS PC Get USB driver • Download the USB driver from the software download section on the Opticon website. (The USB driver can be found as software for either CRD972X or OPL972X) • Place the file on your hard disk in a separate directory and unpack the contents of the file.
1). Through this connection all multicradles can communicate to the PC. Connect RS485 A maximum of 16 multicradles can be connected in a network through RS485 cables. MASTER SLAVE SLAVE RS232/RS485 RS232/RS485 RS232/RS485 TERMINATE TERMINATE 16 - OPTICON OPL972X/CRD972X...
[Q1] is pressed the value of the digit is incremented by one hexadecimal value. When the proper value is displayed move the marker to the next digit with the right key [Q2]. When the setting of the device address is done, confirm with the middle [Trigger]key. 18 - OPTICON OPL972X/CRD972X...
[Q2]. When the setting of the code is done, confirm by the middle [Trigger]key. Delete PIN-code The PIN-code is seen as not set when all digits are set to none (…………….) OPL972X/CRD972X OPTICON - 19...
COLLECTOR The Bluetooth bar code data collector model will communicate with the SIG certified Bluetooth devices. The choice in profile (SPP or DUN) that needs to be supported must be set in the user’s application program. 20 - OPTICON OPL972X/CRD972X...
• Check that the width of the bar code label does not exceed the width of the light beam. • Change the angle between the bar code and the scanner. • Change the distance between the bar code and the scanner. OPL972X/CRD972X OPTICON - 21...
? No data transmitted, or corrupted data. • Check if the interface cable is undamaged, and properly connected to the cradle and the host computer. • Check the COM port and baud rate settings, and try again. 22 - OPTICON OPL972X/CRD972X...
Barcode data collector does not respond to key presses, while the display stays on. ? Message “Application halted” or “No application installed” is shown. • There is no proper user’s application loaded in the bar code data collector. Contact your supplier. OPL972X/CRD972X OPTICON - 23...
Need help?
Do you have a question about the OPL 972 Series and is the answer not in the manual?
Questions and answers