Default Settings 2: Read Options, Trigger, Buzzer; Default Settings 3: Communication Options; Default Settings 4: Bluetooth Options - Opticon OPL 2724 Specification Manual

10.3. Default Settings 2: Read Options, Trigger, Buzzer

Item
Setting the number of characters
Read mode
Multiple read reset time
Add-on wait mode
NW-7 intercharacter gap check
Redundancy Default option
([X0] setting)
Trigger switch
Read time
Buzzer duration
Buzzer tone
Buzzer loudness
Good read LED

10.4. Default Settings 3: Communication Options

Item
Memorizing
Trigger to connect/disconnect
Auto disconnect (by inactivity)
Auto reconnect
Power saving

10.5. Default Settings 4: Bluetooth Options

Item
Set Bluetooth address label
Authentication
PIN-code label
Encryption
Default Setting
Fixed length OFF all codes. A minimum length,
which varies per symbology, is required.
Multiple read
500 ms
500 ms
Up to 1 character
Read 3 times, redundancy = 2
Enable
2 seconds (when trigger enabled)
200 ms
3 kHz + 2.5 kHz
Maximum
Indicator duration 200 ms
Default Setting
Off
Off
Off
5 min.
Auto
Default Setting
Enable
Disable
Disable
Disable
21
Opticon
OPL 2724
Specifications Manual