Opticon OPI-2101 Quick Start Manual

OPI-2101
• Read this quick start guide carefully before installing and/or using this product.
• Keep this quick start guide for future reference and store it in a safe place.
• This quick start guide may be revised or withdrawn at any time without prior notice.
• This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted
to any electronic or machine readable form without prior written consent of Opticon.
• Trademarks used are property of their respective owners.
• Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect
damages howsoever caused.
1. Laser Safety
Do not stare into the laser beam.
2. Handling Instructions
OPI-2101
• Do not attempt to disassemble, modify or update this device.
• Operating the scanner while operating machinery or a vehicle can be distracting.
• Do not plug/unplug the connector before disconnecting the power.
• Do not drop or put heavy items on this product/cable.
• Do not pinch or forcibly bend the cable, especially at very low temperature.
• Do not swing the device around by the cable.
• Do not insert foreign substances into the device.
• Do not use/leave this device in the following areas.
- In areas exposed to direct sunlight for long periods of time
- In dusty environments
- In risk for an exposure to chemicals
- Near water or other liquids, as well as in extremely high humidity
- Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat
- Near TVs, microwaves, medical devices, or low-power radio stations
- In the reach of blinking lights such as CRT
- In the reach of small children
• Do not throw the device into the fire.
• The instantaneous voltage drop by thunderbolt or other reasons may cause malfunctions.
• When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.
AC/DC Adapter
• Do not use this product with a device which does not meet the specifications.
• Do not use any plug connectors other than the ones provided in this product package.
• Insert the plug connector properly into a socket.
• This product may produce heat when using but it does not affect its performance.
• Do not damage the cable.
• Do not bend or pull the cable forcibly.
• Do not place heavy objects on the cable.
• Do not hold the adapter on the cable when unpluging this product.
• Do not plug in or out this product with wet hands.
• Do not store or use this product in direct sunlight, near heating equipments or in dusty area.
• Do not cover this product with cloth.
• Please stop using this product if it starts producing heat or smoke.
• Unplug this product when it is not in use.
• Unplug this product when cleaning.
Introduction
Notice
Caution and Warning
©
Copyright 2008, Opticon All rights reserved.

Quick Start Guide

(Please refer to the specification manual and instruction guide for details.)