Setting Up The Paper Sources ("Paper Source Setup" Menu) - Konica Minolta Di1611 Advanced Information

Utility Mode – Copy Functions
7.3 Setting Up the Paper Sources ("PAPER SOURCE
SETUP" Menu)
From the "PAPER SOURCE SETUP" menu, the various settings for the
paper trays can be changed.
"PAPER SOURCE SETUP" menu:
PAPER SOURCE
No.
SETUP
1 INCH/METRIC
2 TRAY1 PAPER
3 PAPER TYPE
Di1611/Di2011
Description
This function can be used to set the size measurement
system for the paper loaded in each tray. It can be used
to select whether paper measured in centimeters
("METRIC"), such as A4 and B5 sizes, or paper
measured in inches ("INCH"), such as Letter size, is
loaded. If no particular setting is selected, the paper size
is detected automatically.
• The manufacturer's default setting is "METRIC".
This function can be used to set the type of paper
("PLAIN", "OHP", "CARD" or "ENVELOPE") loaded into
the 1st Tray, and the size of the paper ("AUTO" or "SIZE
INPUT"). If the paper size is set to "SIZE INPUT", type in
the paper size.
• The manufacturer's default settings are "PLAIN" and
"AUTO".
This function can be used to specify the type of paper
loaded into a tray, which determines whether or not the
paper is available with the Auto Paper function or the
tray is available with the auto tray switching feature.
Select the paper type ("PLAIN", "RECYCLE" or
"SPECIAL") to specify whether the paper is available
with the Auto Paper function or the tray is available with
the auto tray switching feature.
If special paper is loaded into the tray, "PLAIN",
"RECYCLE", "SPECIAL" or "1-SIDE" must be selected.
"PLAIN":The Auto Paper function can be selected, the
auto tray switching feature is available, and double-
sided copies can be made.
"RECYCLE":The Auto Paper function cannot be
selected; however, the auto tray switching feature is
available, and double-sided copies can be made.
"SPECIAL":The Auto Paper function cannot be selected,
and the auto tray switching feature is not available;
however, double-sided copies can be made.
"1-SIDE":The Auto Paper function can be selected and
the auto tray switching feature is available only when
making single-sided copies. In addition, double-sided
copies can be made.
• The manufacturer's default setting is "PLAIN".
7
7-13