Useful Operations
To copy onto label sheets
As an example, the following procedure describes how to make copies
onto 200 mm × 250 mm label sheets loaded into the 1st Tray.
1
Position the document(s) to be copied.
Refer to "Loading the Document" on page 3-8.
2
Adjust the paper guides in the 1st
Tray, and load the label sheets.
Load label sheets so that the
surface to be printed on faces
upward, as shown in the
illustration.
3
Press the [Utility] key twice.
The "PAPER SOURCE SETUP"
menu appears.
4
From the 10-Key Pad, press the [2]
key.
"TRAY1 PAPER" appears.
Di1611/Di2011
4
4-7