To Set The "Paper Type" Function - Konica Minolta Di1611 Advanced Information

7

To set the "PAPER TYPE" function

1
Select the "PAPER SOURCE
SETUP" menu.
Refer to "To select the "PAPER
SOURCE SETUP" menu" on
page 7-14.
2
Press the [3] key from the 10-Key
Pad to select "PAPER TYPE".
3
Using the
paper tray, and then press the [Yes]
key.
4
Using the
either "PLAIN", "RECYCLE" or
"SPECIAL", "1-SIDE" and then
press the [Yes] key.
The "PAPER SOURCE SETUP"
menu appears again.
Note
"1-SIDE" is displayed only when the machine is equipped with the
Duplex Unit (option for the Di2011 only).
7-18
and keys, select a
and keys, select
Utility Mode – Copy Functions
Di1611/Di2011