Order For Automatically Switching Paper Drawers - Konica Minolta Di1611 Advanced Information

5

Order for Automatically Switching Paper Drawers

When a different paper drawer is automatically selected, the next paper
drawer in the following list is chosen.
1st paper drawer A 2nd paper drawer A 3rd paper drawer A 4th paper
drawer A 5th paper drawer A Multiple Bypass
Note
If special media, such as OHP transparencies or label sheets, are
loaded into the 1st paper drawer or the Multiple Bypass, the auto tray
switching feature may cause the paper to be fed incorrectly.
In this case, we recommend that the settings be changed as follows.
For the 1st paper drawer, change the paper type using the "TRAY1
PAPER" function on the "PAPER SOURCE SETUP" menu of the
Utility mode (p. 7-16). For the Multiple Bypass, specify the paper type
after loading the paper (p. 5-15).
5-24
Before Making Copies
Di1611/Di2011